International Telco Poles steel monopoles

Sunday, 01 January, 2017 | Supplied by: International Telco Poles


20161101 151654

International Telco Poles’ steel monopoles are designed for the communications market. The standard range starts from 15 to 45 m above ground level. Poles can be direct buried or base plate mounted with anchor bolts and templates.

Non-standard designs are available to suit site specification, taking into consideration the type and quantity of antennas and specific wind regions in Australia and New Zealand.

All poles are tapered and sections are assembled via slip fit method. Poles are manufactured to the highest quality standard using ASTM 450 MPa steel with low silicon content to produce a uniform hot dip galvanised finish.

Additional attachments to the poles are also available, including head frames, antenna mounts and climbing systems.

Online: www.ipoles.com.au/
Phone: 1300 663 575
Related Products

Hytera broadband mesh emergency solution

Hytera's emergency communication solution combines network transmission, dynamic broadband...

XPedite5205 XMC/PMC-based embedded services router

The XPedite5205 XMC/PMC-based embedded services router (ESR) runs Cisco IOS software with Cisco...

NI mmWave transceiver system

The NI mmWave transceiver system enables the full transceiver to transmit and/or receive...


  • All content Copyright © 2017 Westwick-Farrow Pty Ltd