The Telit GE865 breakout board WT25_GE865 makes it easier to get a microcontroller connected to the internet over 2G GSM/GPRS network.
The solder balls of the device can be soldered from behind the thin printed circuit board, as easily as industry standard DIP parts. The ball pitch on the GE865 is 2.4 mm.
Features include: optional RS232 using MAX3232 for easy set-up/debug using USB-to-serial dongle; linear LDO regulator on board, adjustable voltage setpoint and load point sense wire; status LED blinks at different rates to indicate connection status; 10-pin connection to P0-7 and Power on prototype board; MMCX antenna connector, MMCX to SMA cables available.
Phone: 02 9889 2520
Cambium Networks cnMatrix EX3024F aggregation layer switch
The switch is built with next-generation architecture that delivers non-blocking performance,...
Quectel RG255G 5G Redcap MediaTek-based module
Available in three form factors — LGA, M.2 and Mini PCIe — the module...
Ventech Systems enclosures for high-tech equipment
Ventech Systems specialises in standalone industrial enclosures tailored to safeguard critical...