Anritsu High-Performance Signal Analyzer for 5G and Wideband Signal Measurement

Wednesday, 01 November, 2017 | Supplied by: Anritsu Pty Ltd


Ms2850a xr

Anritsu has announced the release of its high-performance MS2850A Signal Analyzer targeting development and commercial production of 5G mobile communications systems.

The MS2850A supports a measurement range up to 44.5 GHz, analysis bandwidth up to 1 GHz and the evaluation of 5G multicarrier signals. Its high dynamic range and good flatness performance cut measurement times using all-at-once, high-accuracy measurements of a typical 800 MHz modulation bandwidth to be used in 5G (eg, eight 100 MHz bandwidth carriers).

With many operators currently preparing the introduction of next-generation 5G cellular mobile communications systems, with plans to start actual testing from late 2017 into 2018, leading wireless equipment makers have started transitioning from the development and verification testing phases to development of commercial models and preparations for volume manufacturing. Additionally, other non-5G communications fields will have the same bandwidth and flatness requirements as 5G when broadband communications come into use offering larger data capacity at faster speeds.

The signal analyser supports transmitter performance tests for wireless communications equipment during development and manufacturing. Installing the 5G measurement software packages in the MS2850A supports measurement of 5G uplink and downlink signal frequency error, power, EVM, etc, using CP-OFDM modulation. Additionally, downlink measurements evaluate multicarriers all at once. Noise figure (NF) and phase noise measurement functions can also be installed.

Not only does the MS2850A support all previous cellular technologies, such as LTE, W-CDMA, TD-SCDMA and GSM, it also offers futureproof support for the new 5G NR standards now being defined by 3GPP.

Online: www.anritsu.com
Phone: 03 9558 8177
Related Products

Phoenix Contact PTTB 2,5-ILA 100 current indicator terminal block

The Phoenix Contact PTTB 2,5-ILA 100 current indicator terminal block simplifies the connection...

Valvetrab SEC-DC type 2 surge protective devices

Valvetrab SEC-DC type 2 surge protective devices are narrow pluggable modules with just 12 mm per...

Survey Technologies Rx-Tx Go case

The Survey Technologies Rx-Tx Go case provides the capability to measure downlink RSSI and BER...


  • All content Copyright © 2017 Westwick-Farrow Pty Ltd