Test & measure

Electrical safety analyser

29 April, 2009 | Supplied by: Domo-Technica Pty Ltd

The ESA620 electrical safety analyser has a selection of three test loads, two protective earth test currents and two insulation test voltages to perform all primary electrical safety tests as well as several additional leakage tests for premium standards compliance worldwide.


Earth ground tester

29 April, 2009 | Supplied by: Fluke Australia Pty Ltd

The Fluke 1625 GEO earth ground testers offer stateless testing to make earth ground loop resistance testing quicker and easier. There is no need for a separate earth ground clamp.


SMBV100A vector signal generator

29 April, 2009 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd

The SMBV100A vector signal generator from Rohde & Schwarz offers performance that until now has been available only in more expensive instruments.


Test suite

29 April, 2009 | Supplied by: Vicom Australia Pty Ltd

Aeroflex has enhanced its support for CDG Stage II interoperability and CDG Stage I signalling conformance testing with the release of a test suite for the C.S0044-A specification.


Automated testing

29 April, 2009 | Supplied by: Vicom Australia Pty Ltd

Aeroflex has released auto-test II Motorola test and alignment support for Motorola XTS-5000 radios.


Microwave spectrum analyser

29 April, 2009 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd

The portable microwave spectrum analyser, FSL18 from Rohde & Schwarz expands the company’s product portfolio for spectrum analysis to meet the increasing demand for compact instruments in applications such as the installation and maintenance of WiMAX networks.


Portable DPO

28 April, 2009 | Supplied by: TekMark Australia Pty Ltd

Tektronix has released the DPO3000 digital phosphor oscilloscopes, a portable series of models that provides triggering and decode support for serial buses used in embedded design applications.


Handheld analyser

08 April, 2009 | Supplied by: Scientific Devices Australia

A handheld, battery-powered spectrum analyser from Will’tek has a frequency range of 100 kHz to 7.5 GHz. It can handle scalar network analysis, reflection measurement such as VSWR and DTF measurements supporting antenna installation and verification (option) and a tracking generator option that enables cable measurements in the field.


Digital phosphor ’scopes

08 April, 2009 | Supplied by: RS

RS Components has added the TDS3000C series of oscilloscopes from Tektronix to its range.


White-noise generator

08 April, 2009 | Supplied by: ASD Technology Pty Ltd

ASD has released the NW2.3G2.7AWGN-4S WiMAX and MIMO tester from NoiseWave.


4-channel DSOs

08 April, 2009 | Supplied by: Emona Instruments Pty Ltd

The latest series of 4-channel Rigol oscilloscopes is available from Emona Instruments.


Test set software

08 April, 2009 | Supplied by: Cobham AvComm

Aeroflex has released version 1.7.4 software for the Aeroflex 3900 series digital radio test set that includes support for Motorola’s Astro SmartNet/SmartZone systems.


Digital-storage oscilloscopes

08 April, 2009 | Supplied by: Keysight Technologies Australia Pty Ltd

The InfiniiVision 7000 mixed-signal and digital-storage oscilloscopes offer bandwidths up to 1 GHz and deliver a deep memory waveform update rate of up to 100,000 waveforms/s.


Vitrek electrical safety analyser

08 April, 2009 | Supplied by: Westek Electronics Pty Ltd

The Vitrek V5 electrical safety analyser combines AC and DC dielectric strength testing, insulation resistance testing, leakage current and high-current ground bond testing in accordance with UL, CSA, IEC and TUV standards.


Handheld test set

08 April, 2009 | Supplied by: Cobham AvComm

Aeroflex has released software for the 3500 1 GHz handheld radio test set to support Survey Technologies Field Test 6 Software.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd