GateTel EZ863-GPS-PY terminal

Thursday, 03 February, 2011 | Supplied by: Glyn Ltd

GateTel EZ863-GPS-PY terminal

GateTel offers the EZ863-GPS-PY terminal which is a complete modem GPS and GSM solution based on Telit’s GE863-GPS module. The terminal is supplied with an embedded Python script interpreter that allows custom programming. It also has a 24-pin connector for GPIO and can be directly controlled by a standard 9-pin serial RS232 interface.

A USB to RS232 interface cable is also available as an extra accessory option. The terminal supply voltage range is from 5-30 DC.

Features include: quad-band EGSM 850/900/1800/1900 MHz; output power class 4 (2 W) 850/900 MHz, Class 1 (1 W) 1800/1900 MHz; AT commands according to GSM 07.05, 07.07 and Telit commands; power consumption - power off 26 µA, idle 4 mA, GPRS (max) 700 mA; eight general-purpose inputs, four general-purpose open collector outputs; LIPI battery 960 mA/h with internal charger; relay 30 V 1 A for external control; memory - 3 MB of NV, 1.5 MB RAM; GPS high sensitivity for indoor reception up to -159 dBm; fast TTFFs at low signal levels, hot starts less than 2 s; support 20-channel GPS, GPS NMEA 0183 output format; Python software ready to be loaded - free GPS GPRS tracking software, low-cost Python downloader via RS232, Python downloader via GPRS.

Online: www.glyn.com.au
Phone: 02 9889 2520
Related Products

Nokia FastMile 5G receiver and 5G Gateway 7

The devices are designed to enable operators to conserve radio capacity and improve coverage of...

D2UNet cybersecurity services

D2UNet collaborates closely with clients, focusing on their network structure, availability,...

Keysight multi-industry conferences

Keysight Technologies is holding its Keysight multi-industry virtual live conferences from 23 to...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd