Helios RMS Series remote monitoring
The RMS Series is a remote voltage monitoring, data acquisition and control device specifically designed for use with battery-powered wireless internet repeater sites, or other AC- and DC-powered remote equipment.
No matter how remote a site’s location may be, as long as there is internet connectivity the RMS Series allows users to monitor their site.
The RMS can control generators, pumps and lights, and turn devices on or off. It enables the measurement of battery voltage and charging, as well as amperage measurement through a shunt. It provides measurement of wind turbine and solar panel output, plus detection of A/C power, presence or absence. It also has door and window contact monitoring and fuel tank level monitoring with email and SMS alerts.
On the RMS300, features include: low noise switching power supplies accept 8–60 VDC input and can be powered directly from 12, 24 or 48 V battery banks; battery backed up, real-time clock; one onboard temperature sensor –25 to +100°C; eight 24-bit isolated voltmeters (±100 VDC). Each voltmeter has its own 24-bit Delta Sigma ADC; four latching relays for devices using 1–240 V, 16 A AC/DC current; three programmable push-buttons; six general-purpose I/O pins; power output port, 5.0 VDC (500 mA); power output port, 3.3 VDC (500 mA); one full serial port for controlling cell phones, modems, etc; one console serial port; 1-Wire interface for external temperature sensors; and two USB 2.0 ports for cameras, wireless clients, extra Ethernet.
Phone: 02 7200 9200
NI has announced the release of its InstrumentStudio software for NI PXI modular instruments.
The Helios Power Solutions RMS-300 is a voltage monitoring, data acquisition and control device...
Zetron's mission-critical communications systems are end-to-end compliant with NG9-1-1 i3 and...