ICT intelligent DC distribution panels
ICT’s family of intelligent DC distribution panels are designed to be used in 12, 24 or 48 VDC applications. Available in single- and dual-bus models, with fuse- or breaker-protected outputs, they provide the ability to distribute DC power to multiple load devices.
An integrated security-protected Ethernet communications port allows the distribution panel to be monitored from a remote location using an industry-standard web browser. No additional software is required. HTTPS and SNMP V1/V2c protocols are supported. System current, system voltage, individual output currents and fuse/breaker status can be monitored, and alarms can be sent to multiple email accounts.
DC outputs can be turned on and off remotely (select models only), allowing connected loads to be power cycled using the Ethernet connection. When operating from a battery source, automatic load-shedding can be defined to disconnect non-critical loads, thereby increasing battery run time for critical loads. A network watchdog feature will ping up to two IP addresses and power cycle loads such as routers, which may need rebooting to restore communications with the site.
For more information: http://www.ict-power.com/product/dc-power-distribution.
Phone: 02 7200 9200
MCM Electronics NEVERalone personal emergency location device
Equipped with advanced 4G technology, the device provides real-time location tracking and...
Quectel YEGB000Q1A and YEGN000Q1A active GNSS L1 and L5 antennas
Operating in the 1164–1189 and 1559–1606 MHz frequency bands, the devices measure 62...
Quectel YECN001J1A and YECT000WBA external 5G antennas
Both antennas cover the 5G NR Sub-6 GHz frequency bands and are compatible with 4G, 3G, 2G and...