Eaton 3G Wall Mount Power System

Tuesday, 14 September, 2021 | Supplied by: Eaton Electrical (Australia) Pty Ltd


Eaton’s wall mount power system (WMPS) allows users in the industrial control, electrical switching and telecommunications industries to access and monitor highly reliable battery-backed DC power.

Developed in Australia, the system requires minimal space and has a form factor that better suits industrial control and electrical switching boards, and small service closets. It also has sophisticated monitoring and control capabilities.

The system can be configured for either AC mains or solar PV power providing the convenience of a single power system type. This makes it a suitable solution for process control systems in remote locations with limited access to convenient mains AC power, and where PV solar power may be the only cost-effective power source.

The system’s battery backup (lead acid/lithium) and redundancy can support most process controls systems which use PLCs, valves, solenoids, switches and sensors that are powered from 24 or 48 VDC.

The in-built SC200/SC300 advanced system controller delivers full remote monitoring and control, including ethernet, RS232 (TCP/IP or Modbus) and voltage-free relay contacts. It is an N+1 redundant design, supporting up to 1.4 kW (24 VDC) or 2.0 kW (48 VDC) secure power, making it suitable for the oil and gas, mining and industrial power industries.

Online: www.eaton.com
Phone: 02 9693 9333
Related Products

Cambium Networks Outdoor Wi-Fi 6 Access Point – XV2-2T0

The XV2-2T0 outdoor Wi-Fi 6 access point is suitable for outdoor Wi-Fi networks.

ToooAir TA-430 handheld

The TA-430 communications device from ToooAir provides Australia-wide coverage on the 3G/4G/4GX...

ToooAir TA-1500 mobile radio

The ToooAir ANDROID powered TA-1500 is a fixed-mount mobile radio enabling Australia-wide,...


  • All content Copyright © 2021 Westwick-Farrow Pty Ltd