Phoenix Contact CSMA-LAMBDA/4-2.0-BS-SET coaxial protective adapter

Thursday, 22 December, 2011 | Supplied by: Phoenix Contact Pty Ltd


The CSMA-LAMBDA/4-2.0-BS-SET coaxial protective adapter protects radio system antenna connectors for narrowband signals with a frequency range from 1.7 to 2.3 GHz.

The adapter is suitable for use with antenna connectors in cellular telephony and wireless systems.

The protective element is a λ4 rod that short-circuits surges lying ±15% outside the nominal frequency of 2 GHz. This technology provides a protection level without interfering with the useful signal. The protection device set consists of a surge protector and SMA connector adapters.

It can be installed directly into the antenna line or on the terminal device without the need for an additional adapter cable. The CN-UB/MP mounting plate facilitates installation in the control cabinet.

Online: www.phoenixcontact.com.au
Phone: 1300 786 411
Related Products

Quectel YFGD000AA and YFGD000BA GNSS antennas

Quectel Wireless Solutions' YFGD000AA is a high-performance, multi-band active GNSS antenna...

Zetron SALUS end-to-end critical communications platform

Zetron's SALUS brings radio, telephony, MCX and data from across the entire communications...

Quectel YECT004W5AM and YECT005WFA 5G antennas

Both 5G antennas operate in the ultra-wide 600–6000 MHz frequency band to bring 5G...


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd