Times-Protect LP-18-400-N series of DC pass RF lightning and surge protection products

Friday, 11 January, 2013 | Supplied by: Rojone Pty Ltd


Times Microwave Systems has introduced the Times-Protect LP-18-400-N series of DC pass RF lightning and surge protection products with a frequency operating band from DC to 6000 MHz. The bidirectional design with either a type N male or type N female connector on one end can be directly attached to LMR-400 cable via the same standard EZ non-solder interface used on other EZ-400 non-solder-style connectors and uses the same CST-400 prep tool and either the CT-400/300 crimp tool or combination of the HX-4 crimp handle and Y1719 (0.429″ hex) crimp dies for installation.

The protector which handles up to 150 W of RF power and allows for up 72 V of DC voltage to be supplied on the centre pin of the coaxial cable eliminates the two connectors normally needed, thereby reducing insertion loss and return loss, and lowering cost. The series provides an RF equipment protection solution for any application requiring RF only or RF plus DC voltage and current to power tower top-mounted electronics. The LP-18-400-N body is IP67 rated, making it suitable for outdoor as well as indoor installations, and its white bronze-plated housing ensures durability and long life.

Online: www.rojone.com.au
Phone: 02 9829 1555
Related Products

Tait Communications TP9900 P25 multiprotocol portable

Tait Communications is releasing a portable radio that should improve communications between...

Hytera S Series business two-way radios

Hytera Communications' S Series business two-way radios have been designed to cater to small...

CTS RLF and XLF series low-pass filters for harmonic suppression

The RLF and XLF series of low-pass filters, from CTS Corporation, are optimised to support 3GPP...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd