Takachi FC series customisable control box enclosures

Friday, 07 November, 2014 | Supplied by: ERNTEC Pty Ltd

Takachi FC series customisable control box enclosures

The Takachi FC series are profile-based, lightweight aluminium enclosures that can be easily customised to specific size requirements.

Profile-based and with a fixed front panel and screwed or hinged rear panel, this series can provide a custom solution with secure access to the internals and is suitable for touchscreen and display housings, factory automation equipment, control boxes and distribution boxes.

The series is available in five heights ranging from 37.9 up to 150.4 mm. There are 175 standard sizes and beyond that the profile is available in 2 m lengths so a high degree of variation is available. Profiles and faces are silver and black as standard but other colours are available on request; ABS corner blocks are grey or black. Options include internal mounting plate and brackets, internal DIN rails, keyed or non-keyed latch and hinge system, and carry handles.

These units can be pole or suspension-arm mounted and the lightweight design means a lower-cost mounting can be deployed. Protection is to IP40.

Online: www.erntec.net
Phone: 03 9756 4000
Related Products

u-blox SARA-R52 and LEXI-R52 LTE-M cellular module series

The modules are tailored for integrated and concurrent positioning and wireless communication needs.

KOA flat chip resistors

KOA Corporation has released a range of flat chip resistor solutions, suitable for design...

STMicroelectronics VL53L8CX multizone time-of-flight sensor

The sensor projects a wide square field of view of 45° x 45° (65° diagonal) and...

  • All content Copyright © 2024 Westwick-Farrow Pty Ltd