Pasternack low passive intermodulation (PIM) connectors

Thursday, 06 February, 2014 | Supplied by: Rojone Pty Ltd

Pasternack low passive intermodulation (PIM) connectors, available from Rojone, are suitable for installations where custom-length coaxial cable jumpers are needed to provide low PIM levels and good RF performance. They are designed for ease of installation in the field.

These low PIM connectors are designed to fit on most commercially available 1/2″ corrugated copper and aluminium cables. Low PIM connectors are available in 7/16 DIN and Type N series with both male and female interfaces. Custom length assemblies can be made to order.

Each connector body is plated with a tri-metal Albaloy coating that produces a durable surface with good corrosion protection while providing good electrical conductivity and PIM performance. When properly installed, these connectors provide PIM performance of ≤-160 dBc and VSWR levels of ≤1.10 up to 3 GHz. Pasternack low PIM connectors are suitable for building custom assemblies using Pasternack low PIM coaxial cable jumpers.

Phone: 02 9829 1555
Related Products

u-blox SARA-R52 and LEXI-R52 LTE-M cellular module series

The modules are tailored for integrated and concurrent positioning and wireless communication needs.

KOA flat chip resistors

KOA Corporation has released a range of flat chip resistor solutions, suitable for design...

STMicroelectronics VL53L8CX multizone time-of-flight sensor

The sensor projects a wide square field of view of 45° x 45° (65° diagonal) and...

  • All content Copyright © 2024 Westwick-Farrow Pty Ltd