Test & measure > Signal analysers

Anritsu PIM Master MW82119B-0703 Two-port PIM Testing Solution

01 February, 2021

Anritsu introduces the PIM Master MW82119B-0703 2-port 700 MHz PIM analyser.


Fluke DSX-5000 Cable Analyser

04 February, 2020

The DSX-5000 copper cable analyser enables testing and certification of twisted pair cabling for up to 10 Gigabit Ethernet deployments.


Anritsu S820E Site Master microwave antenna and cable analyser

01 January, 2020

Anritsu's S820E Site Master is a microwave antenna and cable analyser with a frequency range from 1 to 20 GHz.


Simco-Ion FMX-004 Electrostatic Fieldmeter

01 January, 2020

The Simco-Ion FMX-004 is a compact electrostatic fieldmeter used for locating and measuring static charges.


Keysight N9048B PXE EMI receiver

10 December, 2019

Keysight's N9048B PXE EMI receiver is CISPR 16-1-1:2019 and MIL-STD-461G (2015) compliant and can support a frequency range of 2 Hz to 44 GHz.


Optimising digital RF communication systems

24 June, 2019 by Mike Fortna and Rob Barden*

Alignment techniques can dramatically improve (or degrade) performance of the radio equipment you use.


Measurements on the go

17 June, 2019

Here are the basics of four measurements you can perform on the go — RTSA, noise figure, CAT and OTA.


Pico Technology PicoVNA 106 vector network analyser

01 April, 2019

The Pico Technology PicoVNA 106 vector network analyser is a USB-controlled, professional and laboratory-grade 300 kHz to 6 GHz vector network analyser.


VeEX CM3000 Cable Modem Network Analyser

01 April, 2019

The VeEX CM3000 Cable Modem Network Analyser can assist users with service and plant verification testing and troubleshooting solutions. It has an intuitive user interface with VGA colour touchscreen and Windows CE operating system.


Anritsu In-building Coverage Mapping for P.25 and DMR Networks

01 October, 2018

The MA8100A Series TRX NEON Signal Mapper from Anritsu is a 3D in-building coverage mapping solution for use with Anritsu Handheld instruments including LMR Master, Spectrum Master, Site Master, BTS/Cell Master and VNA Master.


Anritsu PIM Over CPRI Capability for BTS Master Handheld Base Station Analyzers

01 August, 2018

Anritsu introduces PIM over CPRI software for its BTS Master handheld base station analysers that allow passive intermodulation (PIM) measurements to be made from the ground for the first time.


Megger TDR2000-3P dual-channel time domain reflectometer

30 April, 2018

The Megger TDR2000-3P is a highly portable, high-resolution, compact dual-channel time domain reflectometer (TDR).


Anritsu High-Performance Signal Analyzer for 5G and Wideband Signal Measurement

01 November, 2017

Anritsu has announced the release of its high-performance MS2850A Signal Analyzer targeting development and commercial production of 5G mobile communications systems.


Anritsu S820E Site Master microwave antenna and cable analyser

01 October, 2017

The Anritsu S820E Site Master is an advanced microwave antenna and cable analyser with a frequency range from 1 MHz to 20 GHz.


Anritsu CPRI & OBSAI RF Analysis Capability for Handheld Analysers

01 September, 2017

Anritsu continues to address the emerging test requirements associated with 4G base stations with the introduction of OBSAI RF Analyser software to complement the existing CPRI RF analysis capability of its industry-leading handheld analysers.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd