Test & measure

Keysight Technologies 5G Channel Sounding Reference Solution

27 August, 2015 | Supplied by: Keysight Technologies Australia Pty Ltd

Keysight Technologies has introduced its 5G Channel Sounding Reference Solution, which is designed for accelerating advanced research of millimetre-wave 5G channel models and includes ultrabroadband and MIMO — key requirements to measure the millimetre-wave channel and validate air interface standards.


Rohde & Schwarz NRP2 Power Meter & Voltmeter

25 August, 2015 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd

The compact, robust Rohde & Schwarz NRP2 base unit with colour display supports up to four R&S NRP-Zxx or NRPxxS/SN power sensors and all sensor-dependent measurement functions.


National Instruments Wireless Test System

11 August, 2015 | Supplied by: National Instruments Aust Pty Ltd

The National Instruments Wireless Test System combines advances in PXI hardware to offer a single platform for multi-standard, multi-DUT and multi-port testing, which, when used with flexible test sequencing software, can significantly improve instrument utilisation when testing multiple devices in parallel.


Bird Channel Power Monitor

05 August, 2015 | Supplied by: Vicom Australia Pty Ltd

The Bird Channel Power Monitor from Vicom comprises a 1RU central processor and a variety of sensors that work together to monitor all components of a radio system, including each individual radio, the combiner, the feed lines and antenna.


Keysight E7515A UXM wireless test set

04 August, 2015 | Supplied by: Keysight Technologies Australia Pty Ltd

The enhanced Keysight Technologies E7515A UXM wireless test addresses leading-edge LTE-A carrier aggregation test requirements, with support for downlink 4CC1, 256 QAM, and LTE-U with up to three unlicensed carriers, as well as FDD-TDD mixed CA and uplink intra- and inter-band CA measurements.


Anritsu MT8821C Radio Communication Analyser with LTE-A support

04 August, 2015 | Supplied by: Anritsu Pty Ltd

The Anritsu MT8821C Radio Communication Analyser is an all-in-one RF tester with the capability for supporting LTE-A as well as all other adopted technologies.


Protecting test equipment from RF damage

09 July, 2015 by Adam Purkiss, Field Applications Engineer, Anritsu, EMEA | Supplied by: Anritsu Pty Ltd

A few simple guidelines can go a long way to eliminating the risk of damage when using measurement instruments in the field.


MegiQ 4 GHz PC-based VNA

03 July, 2015 | Supplied by: Emona Instruments Pty Ltd

The MegiQ VNA0440 from Emona Instruments is a fully bidirectional two-port VNA that enables detailed impedance measurements of antennas, components and circuits over a range of 400 to 4000 MHz.


FLIR Systems CM55/57 Flexible Clamp Meters

29 June, 2015 | Supplied by: FLIR Systems Australia Pty Ltd

The FLIR Systems CM55/57 Flexible Clamp Meters and the TA72/74 Universal Flex Current Probe Accessories enable electricians to take accurate measurements in tight, awkward spots that are difficult to access with a traditional hard-jaw clamp meter.


Anritsu VectorStar ME7838A4 4-port broadband VNA

05 June, 2015 | Supplied by: Anritsu Pty Ltd

The Anritsu VectorStar ME7838A4 4-port broadband vector network analyser (VNA) system provides differential broadband sweep from 70 kHz to 110/125 GHz and uses mmWave modules to conduct highly stable and fast measurements when characterising differential devices.


Signal Hound Spike spectrum analysis software v3.0.8

28 May, 2015 | Supplied by: Silvertone Electronics

Signal Hound Spike spectrum analysis software version 3.0.8 provides constellation diagrams, symbol tables, error-vector magnitude (EVM) measurements and bit pattern matching analysis tools for a wide range of modulation types.


Rohde & Schwarz FSWP phase noise analyser and VCO tester

21 May, 2015 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd

The Rohde & Schwarz FSWP phase noise analyser and VCO tester enables ultrasensitive and ultrafast phase noise measurements, as well as measurements of pulsed sources and the residual phase noise of RF components.


Aeroflex 8800S digital radio test set

13 May, 2015 | Supplied by: Vicom Australia Pty Ltd

The Aeroflex 8800S expands upon the features of the 8800 series with P25 Phase II TDMA compatibility and higher direct input power handling of 125 W.


Narda Safety Test Solutions AMB-8059 wideband area monitor

12 May, 2015 | Supplied by: Airmet

The Narda Safety Test Solutions AMB-8059 is a wideband area monitor that monitors electromagnetic fields up to 7 GHz in conformance with the ITU-T Recommendation K.83.


Keysight Technologies FieldFox handheld analyser options

08 May, 2015 | Supplied by: Keysight Technologies Australia Pty Ltd

Keysight Technologies has introduced two cable test options for its FieldFox handheld analysers: time domain reflectometry and extended range transmission analysis.


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd