ICT Site Converter Series rack-mount DC to DC converter
The ICT Site Converter Series are a high-current, high-efficiency, rack-mount DC to DC converter. They are designed for dual-voltage site applications where a 24 or 48 VDC input needs to be converted to a 24 or 12 VDC output to power two-way radios, repeaters, RF amplifiers, trunking systems or other sensitive electronic equipment.
With wide-ranging input of 20 to 60 VDC, the site converter will support 24, 36 and 48 V systems. There are four models available to support 35 A or 50 A at 24 V output, and 70 A or 100 A at 12 V output. Efficiency is 90%, meaning less energy will be lost in the conversion process.
The site converter is fully isolated and can be used in positive or negative ground environments. The wide-ranging input voltage is also ideal for sites where the DC voltage may fluctuate. The site converter’s built-in protection features protect the converter as well as the connected loads from abnormalities.
Output voltage is adjustable between 12.5 and 14.5 VDC or 25 and 29 VDC using a front-mounted trim pot. A remote alarm contact will signal when DC fails or the converter shuts down. A remote contact terminal allows the converter to be shut down remotely for servicing or to conserve the battery when not in use.
Phone: 02 7200 9200
NI has announced the release of its InstrumentStudio software for NI PXI modular instruments.
The Helios Power Solutions RMS-300 is a voltage monitoring, data acquisition and control device...
Zetron's mission-critical communications systems are end-to-end compliant with NG9-1-1 i3 and...