ZCG Australian-made cavity filters

Monday, 09 September, 2024 | Supplied by: ZCG

ZCG Australian-made cavity filters

ZCG’s range of Australian-made cavity filters has undergone a comprehensive redesign, resulting in improved insertion loss, enhanced power handling and the addition of fine-tuning capabilities. The filters are available in both singular and series configurations and are tailored to meet the demands of the following frequency allocations: FM radio; VHF High Band; VHF Airband; UHF 400–520 MHz; and GHz range.

Manufactured at ZCG’s East Gippsland facility with the use of highly conductive materials and temperature-resistant INVAR internals, the cavity filters are offered in bandpass, notch and pass-reject (high or low pass) configurations. Trusted by a diverse range of industries, including emergency services and air traffic control communications, the high-demand cavity filters are ready for immediate installation. Mounting hardware suitable for 19″ racks, wall mounting or secure floor installation is available to suit all installation requirements.

Online: www.zcg.com.au
Phone: 03 5157 1203
Related Products

Quectel YFGD000AA and YFGD000BA GNSS antennas

Quectel Wireless Solutions' YFGD000AA is a high-performance, multi-band active GNSS antenna...

Zetron SALUS end-to-end critical communications platform

Zetron's SALUS brings radio, telephony, MCX and data from across the entire communications...

Quectel YECT004W5AM and YECT005WFA 5G antennas

Both 5G antennas operate in the ultra-wide 600–6000 MHz frequency band to bring 5G...


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd