Keystone Electronics has developed a group of low-profile clips which firmly secure inserted A and AA batteries to withstand shock and vibration.
Featured is an exclusive ‘flow hole’ SMT solder tail design which significantly enhances joint strength and battery retention. At the same time, low profiles make the clips suitable for dense PCB placements. The clips are made of 0.30 mm thick, nickel-plated steel and are available in bulk or on tape and reel with 125 pieces per 15" reel. A 44 mm wide polystyrene carrier tape, meeting ANSI/EIA-481 standards, is used as the reel with parts mounted on a 24 mm pitch.
Phone: 08 8268 2733
ZCG telescopic mast solutions
ZCG delivers a full suite of modular mast solutions to meet the demands of Australia's...
M2M One Satellite Airtime
M2M One Satellite Airtime has been described as Australia's first industrial IoT satellite...
Panorama Antennas LPBSC-6-60 and B4BSC-6-60 IP68-certified antennas
The LPBSC-6-60 and B4BSC-6-60 are omnidirectional broadband antenna ranges covering...
