Battery presence testing
Innovative Energies' No-Break 3 battery backed-up DC power supply system employing 'smart' testing for battery presence does not rely solely on charge current sensing or power supply output interruption. The NB3 system continuously monitors charge current and initiates a full test if current falls below a set value for any reason; within a set time interval.
A preload is applied (should there be no standing load) and power module output voltage is then adjusted to allow unambiguous sensing and confirmation of battery presence (or absence) without compromising the integrity of the system. If no battery or a faulty battery is detected, normal supply is immediately resumed and an alarm is raised.
ZCG telescopic mast solutions
ZCG delivers a full suite of modular mast solutions to meet the demands of Australia's...
M2M One Satellite Airtime
M2M One Satellite Airtime has been described as Australia's first industrial IoT satellite...
Panorama Antennas LPBSC-6-60 and B4BSC-6-60 IP68-certified antennas
The LPBSC-6-60 and B4BSC-6-60 are omnidirectional broadband antenna ranges covering...
