EPR Safety Mat

Friday, 30 October, 2015 | Supplied by: Lightning Protection International Pty Ltd


The EPR Safety Mat provides a simple means for mitigating step and touch voltage hazards via a three-layer design that complies with IEC61111, IEEE Std.81 and ENA EG1 standards.

The central, electrically conductive layer rapidly equalises the electrical potential across the mat. The upper layer insulates the asset from the electrically conductive layer. The lower layer is a special electrically conductive elastomer that protects the central layer and provides electrical continuity to that layer.

The mat is constructed from coarse non-slip PVC rubber fabric (layer 1), fine wire mesh stainless steel 316L (layer 2) and medium non-slip PVC rubber fabric (layer 3), and is sufficiently flexible enough to be rolled and unrolled as required in temporary and semi-permanent applications. Standard dimensions are 1 x 1.5 m with a nominal thickness of 3.2 mm (complete with bonding strap). Other sizes are available on request. Weight is less than 7 kg per lineal metre.

Online: www.lpi.com.au
Phone: 03 6281 2477
Related Products

Tait Communications TP9900 P25 multiprotocol portable

Tait Communications is releasing a portable radio that should improve communications between...

Hytera S Series business two-way radios

Hytera Communications' S Series business two-way radios have been designed to cater to small...

CTS RLF and XLF series low-pass filters for harmonic suppression

The RLF and XLF series of low-pass filters, from CTS Corporation, are optimised to support 3GPP...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd