The D series of general-purpose, low-cost RF filters for EMI applications uses a single-stage filter for use in equipment to reduce or eliminate moderate conducted interference that prevents a piece of equipment from conforming to the relevant EMI specification.
The series is small and easily installed, and is available in current ratings from 1 to 200 A and in different connection types (ie, pigtails, spade or screw).
A QA test, of a one-minute test voltage of 1500 AC applied line to line and line to ground, is performed on each filter at manufacture and they also conform to climate category 25/085/21.
Phone: 03 8739 6700
ZCG telescopic mast solutions
ZCG delivers a full suite of modular mast solutions to meet the demands of Australia's...
M2M One Satellite Airtime
M2M One Satellite Airtime has been described as Australia's first industrial IoT satellite...
Panorama Antennas LPBSC-6-60 and B4BSC-6-60 IP68-certified antennas
The LPBSC-6-60 and B4BSC-6-60 are omnidirectional broadband antenna ranges covering...
