TE Connectivity InterReach Express Single-band all-Ethernet in-building DAS

Tuesday, 05 May, 2015 | Supplied by: Commscope


TE Connectivity’s InterReach Express single-band all-Ethernet in-building DAS for 850, 900, 1800 and 2100 MHz applications is used to extend wireless coverage to specific areas indoors.

InterReach Express transports RF from a radio source over Ethernet cable to distributed active antenna units (AAU) to amplify the mobile signal close to the user. Compared to repeaters and passive systems, InterReach Express allows users to customise capacity inside buildings when the system is paired with a small base station and provides pinpoint coverage. Additionally, distributed amplifiers provide the same level of service output at each location. The signal is stronger, reliable and better for data.

InterReach Express is suited to: small to medium-size enterprise applications (single buildings <30,000 m2); large facility hole-fill applications where there is inadequate mobile reliability; maritime applications; and cascading in large facilities where passive systems are inadequate as capacity and data demands increase.

Online: commscope.com
Phone: 02 8748 9500
Related Products

Quectel YFGD000AA and YFGD000BA GNSS antennas

Quectel Wireless Solutions' YFGD000AA is a high-performance, multi-band active GNSS antenna...

Zetron SALUS end-to-end critical communications platform

Zetron's SALUS brings radio, telephony, MCX and data from across the entire communications...

Quectel YECT004W5AM and YECT005WFA 5G antennas

Both 5G antennas operate in the ultra-wide 600–6000 MHz frequency band to bring 5G...


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd