Zetron Pathway RoIP connector

Monday, 18 August, 2014 | Supplied by: Zetron Australasia Pty Ltd


Zetron’s Pathway enables connection of up to four control stations or console systems to a single Pathway device using the TIA P25 Digital Fixed Station Interface (DFSI) protocol. Pathway in turn connects to a single DFSI capable based station, enabling each controlling station or console system to be able to use this single fixed station at the same time. Pathway acts as a DFSI proxy in this instance, directing appropriate messages and handling message conflicts. All normal voice and data call functions are possible.

Pathway also provides the ability to pass state information back to each controller if one of these were to change the state of the fixed station. This is handy for functions such as Channel Change, Squelch Enable and Repeat mode functions where there would normally only be an acknowledgement response back to the requesting party and thus allowing the other controllers to effectively remain synchronised with the state of the fixed station.

Pathway provides three LAN interfaces - one dedicated to the fixed station interface and the other two available for additional network resilience when connecting up to any number of the four available controller stations/console systems.

Online: www.zetron.com
Phone: 07 3856 4888
Related Products

ZCG telescopic mast solutions

ZCG delivers a full suite of modular mast solutions to meet the demands of Australia's...

M2M One Satellite Airtime

M2M One Satellite Airtime has been described as Australia's first industrial IoT satellite...

Panorama Antennas LPBSC-6-60 and B4BSC-6-60 IP68-certified antennas

The LPBSC-6-60 and B4BSC-6-60 are omnidirectional broadband antenna ranges covering...


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd