Wavecontrol MonitEM electromagnetic monitoring system
The Wavecontrol MonitEM electromagnetic monitoring system makes it possible to continuously check the field strength of the emissions from electromagnetic radiation emitters such as antennas and power lines, and to transfer the data obtained over the internet in regular automatic reports to a central location.
The system consists of a number of monitoring devices located near the electromagnetic field sources (usually antennas) or in places of special interest, such as schools or hospitals. The monitoring devices are then remotely controlled by computer from a control centre. The monitoring devices sample the electromagnetic field continuously, store the measurements temporarily and transmit them at regular intervals to the control centre.
The electromagnetic field is measured using a triaxial isotropic probe to allow measurement of the full composite field arriving from all directions. The control system has been designed for direct integration with the internet, allowing an authorised user to check the stations from any location where an internet connection is available.
The data collected can be published so that any interested party can observe. The product can monitor between 10 Hz and 8 GHz (depending on the installed probe) and, because of the solar charging option, can be located in areas where mains power is unavailable.
Phone: 03 9390 4582
Digilent ADP2440 and ADP2450 mixed signal oscilloscopes
The Digilent ADP2440 and ADP2450 USB‑based mixed signal oscilloscopes are designed for modern...
Rohde & Schwarz TSMS8 wideband mobile network scanner
The TSMS8 scans a frequency range of 10 MHz to 8.5 GHz, and has a front-end bandwidth...
Signal Hound PCR4200 4-channel phase-coherent receiver
The PCR4200 is a high-performance, 100 kHz – 20 GHz, 4-channel phase coherent receiver that...
