Satellite comms helping to modernise railway control

Thursday, 15 May, 2014


Satellite communications will soon make train travel safer by improving how the networks are controlled in remote areas where ground equipment is too costly.

For the first time in Europe, a project co-funded by the European Space Agency (ESA) has shown how navigation and telecom satellites can be used together with existing rail signalling systems.

Railways rely on dedicated terrestrial networks that work as part of the European Railway Traffic Management System, ERTMS, used around Europe to control trains and provide instructions to drivers.

Trains pinpoint their location by means of electronic beacons positioned along the track every 500-1500 metres, transmitting the information via a dedicated terrestrial cell network to control centres.

The centres then transmit route data, recommended speeds and other information back to drivers over the same network.

Train locomotive with satellite antenna

A satellite antenna on a locomotive's cabin roof. Credit: ESA.

A satellite solution

Satellites will increase the viability of ERTMS for low-traffic lines by avoiding the need for expensive track equipment and dedicated telecom networks.

Virtual beacons are used instead - digital points in a railway database - and the train’s position is fixed by satnav.

The Train Integrated Safety Satellite System project, or 3InSat for short, co-funded by ESA’s Integrated Applications Promotion program, has developed an integrated terrestrial and satcom system that delivers the vital link between train drivers and their control centres.

In April, this approach was demonstrated on a passenger train on the Italian island of Sardinia.

Engineers looking a laptop screens inside a train

The Train Integrated Safety Satellite System was demonstrated on a passenger train on the Italian island of Sardinia in April. Credit: Ansaldo STS.

In the coming months, the 3InSat team led by Ansaldo STS and partners will verify the telecom system, which calls on Inmarsat’s satellite-based broadband global area network and Vodafone’s 3G/4G machine-to-machine data services.

In September, a second series of tests will verify the satellite-based location services that together with the telecom network will eventually be integrated into the ERTMS testbed in Sardinia.

At the end of the year, the satcom system will go live in Australia with a train command and signalling system. And in the near future, it could be adopted by regional lines in Europe.

“The new telecom service we have been testing in Sardinia as part of 3InSat is unprecedented for train control systems,” said Francesco Rispoli of Ansaldo STS. “It paves the way for realising cost-efficient and rapidly deployable signalling systems using, for the first time, non-dedicated telecom networks.”

European Space Agency
http://www.esa.int/ESA

Related Articles

Satellite IoT improves borehole monitoring in mines

Ontoto has integrated Astrocast's Astronode S into its Vibrating Wire data logger, which is...

Uninterrupted connectivity for UNSW's solar race car

Cradlepoint was selected to provide connectivity for the UNSW Sunswift 7 solar race car this...

Fleet management drives surge in GPS tracker market

The global GPS tracker market is on the brink of a substantial valuation, projected to reach...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd