Silicon amplifier for millimetric frequencies
19 February, 2009New imaging and high-capacity wireless communications systems are one step closer to reality, thanks to a millimetre wave amplifier invented at the University of California.
PCB design tool
11 February, 2009AWR and Mentor Graphics have announced AWR Connected for Mentor Graphics.
Bluetooth modules
01 January, 2009Laird Technologies has released a range of Bluetooth modules designed to support the demands of medical equipment manufacturers.
FM receiver module
01 January, 2009The RX2G from Radiometrix is a miniature PCB-mounted UHF radio data receiver module, offered in 433.92 MHz (UK band) and 434.42 MHz (European band) models.
Embedded Wi-Fi module
01 January, 2009Connect One has released Nano WiReach, an embedded Wi-Fi bridge that connects any embedded device to 802.11b/g wireless LANs with minimal programming.
Motor amplifier
01 January, 2009With fully programmable features, a Hall sensor amplifier from M Rutty is specifically engineered to optimise the performance of Portescap’s brushless motors in applications where efficiency, high acceleration or safety are of primary significance.
Laird Technologies RF modules
01 January, 2009Laird Technologies has announced a range of RF modules for 2.4 GHz radios.
Integrated, 3D EM simulation for RF module design
02 September, 2008Agilent Technologies has available the EMDS-for-ADSan integrated design flow solution that includes full 3D EM simulation for RF Module Design. It is integrated into the company's Advanced Design System EDA software platform and eliminates the need for standalone EM tools.
Multi-channel radio module
01 June, 2008Radiometrix has introduced an addition to its LMT2/LMR2 transmitter/receiver series. Making use of the 458.525-459.1 MHz British frequency band (instead of the 433.875-434.650 MHz EU band used in previous versions), these higher power modules increase the distance over which they can communicate to 1 km, allowing engineers to enhance systems that previously had insufficient range (or insufficient link margin).
Vibration-resistant module
01 June, 2008Aimed at applications where RF engineers need to consider the interference effects of nearby vibrating machinery, Radiometrix has developed the HVR2 receiver module, a high vibration-resistant version of the RLC2 that uses the company’s direct digital synthesiser (DDS) local oscillator design to make it almost totally immune to mechanical vibrations at frequencies below 500 Hz.
GE863-PRO3 GSM/GPRS module
07 April, 2008Telit has released the GE863-PRO3 GSM/GPS module. The device includes a quad-band GSM/GPRS class 10 engine as well as a dedicated ARM9 application processor (the Atmel standard microcontroller AT91SAM9260) and flash and RAM memories.
Commercial modular series
05 March, 2008The GME Commercial Modular Series offers the end user greater flexibility when choosing a commercial radio.
Remote programmer
05 March, 2008Amalgamated Instrument has released a radio remote programmer for its large digit displays. This enhances the flexibility of the display range by allowing both set-up and control without wired connection or the necessity to access the set-up pushbuttons within the display. This ease of set-up presents a real safety advantage.
Moxa NPort W2150 Plus and W2250 Plus wireless device servers
07 February, 2008CrispTech has released the Moxa NPort W2150 Plus and W2250 Plus, claimed to be the first wireless device servers in the world to support IEEE 802.11a/b/g.
Amplified noise module
03 August, 2007NoiseWave has enhanced the NW10G-M amplified noise module to feature broadband frequency coverage from 10 MHz to 10 GHz.
