Setec BMS-001 battery monitor
27 June, 2011 byThe BMS-001 is a battery monitor that continuously monitors 12 V lead acid batteries, acting as a ‘fuel gauge’, to estimate the state of charge and time remaining to discharge.
Fluke TL175 TwistGuard test lead range
22 June, 2011 byFluke has available the TL175 TwistGuard test leads, claimed to be the only leads with a manually adjustable test tip guard for use in changing measurement situations.
Aeroflex SV-LTE voice and data testing
04 June, 2011 byAeroflex has added voice and data testing capability to the 7100 LTE digital radio test set.
NTi Audio digital test set
26 April, 2011Available to rent, the NTi Audio digital test set, comprising the Digirator and Digilyser, produces digital audio signals and analyses those signals up to and including 5.1 surround sound.
HT Italia PQA824 power recorder
25 April, 2011 byThe HT Italia PQA824 power recorder measures, records and analyses power quality on electrical installations. It has been designed with Windows CE technology which allows easy and fast analysis of large quantities of data.
Automated testing using NI software
28 March, 2011 by Stephen Patterson, CPE SystemsDesigning and developing a test system that has component and unpowered testing, device programming, radio signal analysis and calibration, and no operator intervention for production testing of a point-to-multipoint radio product used for remote supervisory control and data acquisition network applications, is the challenge.
Anritsu S820D Microwave Sitemaster
14 January, 2011 byThe Anritsu S820D Microwave Sitemaster 25 MHz to 20 GHz is available to rent.
Dwyer Model SM-100 digital sound meter
16 December, 2010 byThe Model SM-100 digital sound meter is designed for measuring noise levels from 30 to 130 dB with accuracy of ±1.5 dB. The meter has a frequency of 31.5 Hz to 8 kHz, three different dB ranges, and a 12.5 mm condenser microphone. It has two frequency weightings - the A weighting ranges from 30 to 130 dB, while the C weighting ranges from 35 to 130 dB.
Quadtech Guardian 6100 Plus safety analyser
16 December, 2010 byThe Quadtech Guardian 6100 Plus safety analyser is suitable for electrical products safety and compliance testing to the requirements of UL, CSA, IEC/EN, TUV and other specifications.
Appa 605 digital insulation resistance, handheld tester/multimeter
16 December, 2010 byThe handheld Appa 605 digital insulation resistance tester measures insulation resistance from 10 kΩ to 20 GΩ with test voltages selectable from 50, 100, 250, 500 and 1000 VDC.
Resistomat 2304 precision ohmmeter
16 December, 2010 byThe Resistomat 2304 precision ohmmeter allows for the automatic inspection of resistances to high accuracy.
Fluke 5080A multi-unit calibrator
16 December, 2010 byThe 5080A calibrator is engineered to accurately and easily calibrate both analog and digital test instruments.
Anritsu ME7873L RF conformance test system
26 November, 2010 byAnritsu says its ME7873L RF conformance test system (RFCT) has become the first to achieve GCF test case approvals for 80% of LTE terminal RF test cases required for terminal certification.
Aeroflex CS9000 broadband signal system
03 November, 2010 byThe CS9000 broadband signal system is claimed to be the premier test system for signal generation and recording for simulation and analysis of advanced communications signals in extreme environments.
Aeroflex TM500 test mobile
03 November, 2010 byThe TM500 test mobile has added support for the 3GPP WCDMA release 9 standard, the latest evolution of the HSPA+ standards, which permits concurrent operation of MIMO (multiple-input, multiple-output) and DC-HSDPA (dual cell high-speed download packet access) to double the maximum data rate to 84 Mbps.
