WiNRADiO RLX-810 network receiver

Thursday, 04 October, 2012 | Supplied by: Radixon Group Pty Ltd

The WiNRADiO RLX-810 network receiver is an integrated turnkey solution to facilitate remote-controlled reception, recording, spectrum sweeping and activity monitoring of the radio spectrum.

No additional application software is required on the client side, as it is provided by the built-in Java applet which runs on most common web browsers. This makes it possible to remotely observe signal spectrum, measure signal strength, tune receiver, set demodulation modes, control IF filter bandwidth and other parameters such as volume, notch or audio filtering, and listen to or record the demodulated audio.

The receiver system provides a frequency range from 9 kHz up to 1800 MHz, facilitating the most common demodulation types (AM, FM-N, FM-W, SSB, USB, LSB, CW) and a configuration tool via web interface.

Audio and IF recordings can be played back to allow post-processing of the received radio signals. All RF monitoring activities take place within the remotely-deployed server system and password-protected users can start various monitoring tasks from different client locations.

Active tasks will keep running even if the network connection should break down. Multiple users can concurrently connect to the server and listen to the downstreamed demodulated audio signal.

Phone: 03 9417 3417
Related Products

TX3100VP UHF CB Starter Kit

The GME TX3100VP Starter Kit comes with a 5 W UHF CB radio and a 6.6 dBi ground-independent...

Hytera SmartOne Dispatch Solution

The Hytera SmartOne dispatch solution is a unified communications platform for the public...

DAMM TetraFlex Outdoor System

The DAMM TetraFlex Outdoor System is a user-friendly, flexible and cost-effective TETRA...

  • All content Copyright © 2024 Westwick-Farrow Pty Ltd