The compact, robust Rohde & Schwarz NRP2 base unit with colour display supports up to four R&S NRP-Zxx or NRPxxS/SN power sensors and all sensor-dependent measurement functions.
The DSX-5000 Cable Analyser copper test solution enables testing and certification of twisted-pair cabling for up to 10 Gigabit Ethernet deployments, and will certify shielded and unshielded structured cabling systems from Category 3 to 6A and Class C to FA at Level V accuracy.
The National Instruments Wireless Test System combines advances in PXI hardware to offer a single platform for multi-standard, multi-DUT and multi-port testing, which, when used with flexible test sequencing software, can significantly improve instrument utilisation when testing multiple devices in parallel.
The Bird Channel Power Monitor from Vicom comprises a 1RU central processor and a variety of sensors that work together to monitor all components of a radio system, including each individual radio, the combiner, the feed lines and antenna.
The Anritsu MT8821C Radio Communication Analyser is an all-in-one RF tester with the capability for supporting LTE-A as well as all other adopted technologies.
The enhanced Keysight Technologies E7515A UXM wireless test addresses leading-edge LTE-A carrier aggregation test requirements, with support for downlink 4CC1, 256 QAM, and LTE-U with up to three unlicensed carriers, as well as FDD-TDD mixed CA and uplink intra- and inter-band CA measurements.
The FW Bell 5180 Gauss/Tesla Meter is a magnetic measuring device with digital signal processing (DSP) that works in either sensitive laboratory environments or rugged industrial settings.
The MegiQ VNA0440 from Emona Instruments is a fully bidirectional two-port VNA that enables detailed impedance measurements of antennas, components and circuits over a range of 400 to 4000 MHz.
The FLIR Systems CM55/57 Flexible Clamp Meters and the TA72/74 Universal Flex Current Probe Accessories enable electricians to take accurate measurements in tight, awkward spots that are difficult to access with a traditional hard-jaw clamp meter.
The Rohde & Schwarz FSWP phase noise analyser and VCO tester enables ultrasensitive and ultrafast phase noise measurements, as well as measurements of pulsed sources and the residual phase noise of RF components.
The Aeroflex 8800S expands upon the features of the 8800 series with P25 Phase II TDMA compatibility and higher direct input power handling of 125 W.
The Narda Safety Test Solutions AMB-8059 is a wideband area monitor that monitors electromagnetic fields up to 7 GHz in conformance with the ITU-T Recommendation K.83.
Keysight Technologies has released IntegraVision, a power analyser that combines accurate power measurements and touch-driven oscilloscope visualisation capabilities in a single instrument.
μWave Wizard is a fast field simulation tool based on mode matching and is a suitable choice for filter, complex wave guide component and antenna design.
Spectrum's digitiserNETBOX series LXI-based instruments are available with two, four or eight fully synchronous channels, feature sampling rates up to 5 GS/s, bandwidth in excess of 1.5 GHz and onboard acquisition memory up to 8 GS.