Test & measure

Agilent 53151A CW microwave frequency counter

22 September, 2011 | Supplied by: TechRentals

The Agilent 53151A CW microwave frequency counter 26.5 GHz has joined the test and measurement rental fleet of TechRentals.


LeCroy SPARQ multipurpose instrument

07 September, 2011 | Supplied by: Vicom Australia Pty Ltd

The LeCroy SPARQ (S-parameters Quick) signal integrity network analyser is a TDR/TDT-based analyser that measures 40 GHz, 4-port S-parameters with a single button press.


Anritsu MD8475A signalling tester

06 September, 2011 | Supplied by: Anritsu Pty Ltd

The MD8475A signalling tester can test a wide range of applications and operating systems on the latest high-speed, multimode LTE devices.


LeCroy WaveMaster 8 Zi-A oscilloscopes

06 September, 2011 | Supplied by: Vicom Australia Pty Ltd

The LeCroy WaveMaster 8 Zi-A oscilloscopes combine what is claimed to be the highest bandwidth (45 GHz) and sample rate (120 GS/s) with good signal fidelity performance and 20 GHz on all four input channels.


LeCroy LabMaster 9 Zi-A modular oscilloscope system

05 September, 2011 | Supplied by: Vicom Australia Pty Ltd

The LeCroy LabMaster 9 Zi-A modular oscilloscope system is claimed to redefine oscilloscope performance and capabilities.


Consultant Technology PMM9010 EMI/EMC CISPR16-1-1 compliant test receiver

05 September, 2011 | Supplied by: Consultant Technology Australia Pty Ltd

The PMM9010 EMI/EMC CISPR16-1-1 compliant test receiver now has the upgrade option 9180 module with in-built preamplifier that extends the operation range to 18 GHz.


Lovato DMG series digital multimeters and power analysers

02 September, 2011 | Supplied by: Mechtric Pty Ltd

The Lovato DMG series of digital multimeters and power analysers can provide measurement of up to more than 590 electrical quantities, including harmonics.


LeCroy WaveRunner 6 Zi oscilloscope

02 September, 2011 | Supplied by: Vicom Australia Pty Ltd

The LeCroy WaveRunner 6 Zi oscilloscope is said to be the most versatile scope in the 400 MHz to 4 GHz class. It has deep memory, 40 GS/s sample rate, low noise and fast operation and has a 12-bit analog to digital convertor, deep memory of 256 Mpts/ch and good DC accuracy specifications.


Agilent Infiniium oscilloscope range

01 September, 2011 | Supplied by: Keysight Technologies Australia Pty Ltd

Agilent has enhanced the memory depth of its Infiniium oscilloscope range. All 30 models are now supplied with what is claimed to be the deepest standard memory with the deepest memory options.


7100 LTE digital radio test set

01 September, 2011 | Supplied by: Cobham AvComm

Two options for the 7100 LTE digital radio test set are now available. The options support testing of 3G WCDMA/HSPA and GSM/GPRS and data call hand-over between LTE and HSPA.


Audio Precision APx Bluetooth option test

01 September, 2011 | Supplied by: Vicom Australia Pty Ltd

The Audio Precision APx Bluetooth option is claimed to be the best solution for testing Bluetooth audio.


Laird Technologies MMCU-4 radio remote control receiver

30 August, 2011 | Supplied by: Tekdis

Laird Technologies has released its enhanced MMCU-4 radio remote control receiver.


Fluke ScopeMeter 190 Series II 2-channel portable oscilloscope

29 August, 2011 | Supplied by: Fluke Australia Pty Ltd

The Fluke ScopeMeter 190 Series II is a 2-channel handheld portable oscilloscope that includes a 5000-count digital multimeter and paperless recording modes, creating an advanced test and measurement tool. The unit has a rugged IP51 sealed case that can withstand 3 g vibration or 30 g shock and a CAT III 1000V/CAT IV 600V safety rating.


Regal Electro RE856 battery tester

29 August, 2011 | Supplied by: Valen Power Pty Ltd

Rising impedance is a recognised indicator of pending battery failure and using an RE856 as a proactive trending tool allows technicians to monitor the condition of battery cells while they remain connected in a live circuit.


Megger MOM2 handheld microhmmeter

29 August, 2011 | Supplied by: Megger Limited

The MOM2 handheld microhmmeter can be used to measure the resistance of circuit breaker contacts, bus bars, connections and other links conducting high currents.


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd