Fluke 27 II and 28 II digital multimeters
05 July, 2011 | Supplied by: Fluke Australia Pty Ltd
The Fluke 27 II and 28 II digital multimeters, suitable for operating in harsh conditions, are IP67 rated for water and dust resistance and offer an extended operating temperature range of -15 to +55°C.
Fluke VoltAlert 2AC non-contact voltage tester
04 July, 2011 | Supplied by: Fluke Australia Pty Ltd
The 2AC has been added to the VoltAlert AC non-contact voltage tester range. It is easy to use and tests for energised circuits and defective grounds. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip or power cord where voltage is present.
Bitrode CDN series high-voltage battery testers
01 July, 2011 | Supplied by: Westek Electronics Pty Ltd
Bitrode CDN series high-voltage battery testers are available with a number of battery parameter testing suites including temperature monitoring, high impedance reference electrodes for verifying performance of individual cells, pressure monitoring and polarity reversal in tackless formation applications.
Anritsu MS2711E spectrum master analyser
29 June, 2011 | Supplied by: Anritsu Pty Ltd
The MS2711E Spectrum Master analyser is designed for technicians, installers, field RF engineers and contractors responsible for monitoring the growing number of interfering signals, as well as assessing signal quality on a wide range of increasingly complex signals.
Tektronix FCA3000/FCA3100 frequency counter range
28 June, 2011 | Supplied by: RS
Tektronix has released benchtop instruments that are claimed to provide engineers with a wider range of choices, fulfilling tasks from design and development to production, maintenance and repair.
Tektronix MSO/DPO5000 oscilloscope platform
28 June, 2011 | Supplied by: TekMark Australia Pty Ltd
Tektronix has expanded its oscilloscope range with a mixed signal oscilloscope platform, the MSO/DPO5000 series.
Setec BMS-001 battery monitor
27 June, 2011 | Supplied by: Setec Pty Ltd
The BMS-001 is a battery monitor that continuously monitors 12 V lead acid batteries, acting as a ‘fuel gauge’, to estimate the state of charge and time remaining to discharge.
Agilent M9182A/M9183A PXI-based digital multimeter range
24 June, 2011 | Supplied by: Keysight Technologies Australia Pty Ltd
Agilent has introduced two digital multimeters to complement its family of PXI products. The 6.5-digit instruments offer high measurement speeds within their price range, along with good accuracy and stability.
Fluke TL175 TwistGuard test lead range
22 June, 2011 | Supplied by: Fluke Australia Pty Ltd
Fluke has available the TL175 TwistGuard test leads, claimed to be the only leads with a manually adjustable test tip guard for use in changing measurement situations.
Agilent N9344C/N9343C handheld spectrum analysers
22 June, 2011 | Supplied by: Keysight Technologies Australia Pty Ltd
The N9344C and N9343C handheld spectrum analysers are two field-ready instruments that provide fast and accurate measurement from 1 MHz to 20 GHz and 13.6 GHz. Both instruments are tunable to 9 kHz.
Anritsu oscilloscope probe
21 June, 2011 | Supplied by: Anritsu Pty Ltd
A DC to 7.5 GHz passive probe for evaluating mounted devices with the BERTWave series of high-speed optical sampling oscilloscopes has been released.
Aeroflex SV-LTE voice and data testing
04 June, 2011 | Supplied by: Cobham AvComm
Aeroflex has added voice and data testing capability to the 7100 LTE digital radio test set.
HT Italia PQA824 power recorder
25 April, 2011 | Supplied by: OBIAT Holdings Pty Ltd
The HT Italia PQA824 power recorder measures, records and analyses power quality on electrical installations. It has been designed with Windows CE technology which allows easy and fast analysis of large quantities of data.
Fluke clamp meters range
22 April, 2011 | Supplied by: Fluke Australia Pty Ltd
The Fluke range of clamp meters is designed to meet requirements for testing and maintaining electrical systems, industrial equipment, and commercial and industrial HVAC equipment.
Ideal Industries industrial-grade True RMS TightSight clamp meters
21 April, 2011 | Supplied by: TRIO Test & Measurement
Ideal Industries’ industrial-grade versions of its True RMS TightSight clamp meters are suitable for demanding applications where accuracy, reliability and durability are required.
