Quadtech Guardian 6100 Plus safety analyser
16 December, 2010 | Supplied by: Power Parameters Pty Ltd
The Quadtech Guardian 6100 Plus safety analyser is suitable for electrical products safety and compliance testing to the requirements of UL, CSA, IEC/EN, TUV and other specifications.
Dwyer Model SM-100 digital sound meter
16 December, 2010 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The Model SM-100 digital sound meter is designed for measuring noise levels from 30 to 130 dB with accuracy of ±1.5 dB. The meter has a frequency of 31.5 Hz to 8 kHz, three different dB ranges, and a 12.5 mm condenser microphone. It has two frequency weightings - the A weighting ranges from 30 to 130 dB, while the C weighting ranges from 35 to 130 dB.
Fluke 5080A multi-unit calibrator
16 December, 2010 | Supplied by: Fluke Australia Pty Ltd
The 5080A calibrator is engineered to accurately and easily calibrate both analog and digital test instruments.
Resistomat 2304 precision ohmmeter
16 December, 2010 | Supplied by: Bestech Australia Pty Ltd
The Resistomat 2304 precision ohmmeter allows for the automatic inspection of resistances to high accuracy.
LeCroy ArbStudio series waveform generators
16 December, 2010 | Supplied by: Vicom Australia Pty Ltd
LeCroy has released the ArbStudio series of arbitrary waveform generators capable of generating signals up to 125 MHz with high sample rate, long memory and high resolution as well as a variety of operating modes, modulation capabilities and a digital pattern generator.
Advantest R37XX vector network analysers
16 December, 2010 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd
The 300 MHz and 6 GHz vector network analysers are designed to install in a PCI slot.
Agilent Technologies M9392A PXI vector signal analyser
16 December, 2010 | Supplied by: Keysight Technologies Australia Pty Ltd
Agilent Technologies has expanded its test and measurement portfolio into the modular domain with the introduction of new PXI and AXIe products.
Appa 605 digital insulation resistance, handheld tester/multimeter
16 December, 2010 | Supplied by: Power Parameters Pty Ltd
The handheld Appa 605 digital insulation resistance tester measures insulation resistance from 10 kΩ to 20 GΩ with test voltages selectable from 50, 100, 250, 500 and 1000 VDC.
Anritsu MS2038C VNA Master
10 November, 2010 | Supplied by: Anritsu Pty Ltd
The Anritsu VNA Master MS2038C is said to be the highest performance handheld for two-port, two-path measurements.
Rohde & Schwarz ZVA110 network analyser
09 November, 2010 | Supplied by: Rohde & Schwarz (Australia) Pty Ltd
The ZVA110 network analyser covers the frequency range from 10 MHz to 110 GHz.
Aeroflex CS9000 broadband signal system
03 November, 2010 | Supplied by: Cobham AvComm
The CS9000 broadband signal system is claimed to be the premier test system for signal generation and recording for simulation and analysis of advanced communications signals in extreme environments.
Aeroflex TM500 test mobile
03 November, 2010 | Supplied by: Cobham AvComm
The TM500 test mobile has added support for the 3GPP WCDMA release 9 standard, the latest evolution of the HSPA+ standards, which permits concurrent operation of MIMO (multiple-input, multiple-output) and DC-HSDPA (dual cell high-speed download packet access) to double the maximum data rate to 84 Mbps.
Megger PAT320 portable appliance testers
28 October, 2010 | Supplied by: Megger Limited
The PAT320 portable appliance testers are ready to use in automatic mode straight from the box.
HT Italia COMBI419 multifunction meter
28 October, 2010 | Supplied by: OBIAT Holdings Pty Ltd
The HT Italia COMBI419 multifunction meter is designed to perform all safety testing and verification of electrical installations in compliance with VDE0100 and BS7671 standards. The instrument is easy to use, having a wide number of measurement ranges.
Agilent N9342C handheld spectrum analyser
28 October, 2010 | Supplied by: Keysight Technologies Australia Pty Ltd
The N9342C handheld spectrum analyser, designed for RF technicians and engineers performing installation, maintenance and surveillance of RF systems in the field, provides fast, precise measurements, is easy to use and has a range of user customisation and ergonomic features.
