Jaycar HB6302 tray tool/storage case
25 June, 2010 | Jaycar Electronics Pty Ltd
The HB6302 tray tool/storage case facilitates on-site storage of parts, tools or anything else tradespeople need to tote around from job to job.
B&K Precision 4076 and 4079 arbitrary waveform/function generators
25 June, 2010 | Unispan Instruments Pty Ltd
B&K Precision has announced two 50 MHz arbitrary waveform/function generators, models 4076 and 4079, that allow design of a required signal by using the generator’s function or arbitrary waveform section.
AEMC Instruments Simple Logger II Model L481
25 June, 2010 | AEMC Instruments
The Simple Logger II Model L481 is a bipolar 850 VDC data logger that offers a choice of data storage modes and storage rates, allowing operators to configure the logger to optimise memory usage for the application at hand.
VEGA PLICSMOBILE GSM/GPRS instrument interface
25 June, 2010 | VEGA Australia Pty Ltd
The PLICSMOBILE transmitting and receiving unit is equipped with a standard SIM card and sends the measured values via GSM-GPRS service. With this module, remote diagnosis and service can also be carried out worldwide over the public telephone network. PLICSMOBILE can be integrated into the double chamber housings of the VEGA plicsplus series or separately connected to any plicsplus or plics sensor.
B&K Precision model 2831E benchtop multimeter
25 June, 2010 | Unispan Instruments Pty Ltd
B&K Precision has launched the model 2831E benchtop multimeter, suitable for applications including those in manufacturing, service and repair and education.
Linx Technologies HW series dipole and monopole antennas
25 June, 2010 | Clarke & Severn Electronic Solutions
Linx Technologies has released its HW Series ½-wave centre-fed dipole antennas and ¼-wave monopole antennas, available with standard SMA connectors.
D-Link DIR-330 Wireless G NetDefend Broadband VPN router
25 June, 2010 | D-Link Australia Pty Ltd
The DIR-330 Wireless G NetDefend Broadband VPN router with 4-port switch is an easy-to-deploy wireless routing, switching, virtual private network and firewall solution designed for small business.
GeoLENs mobile location centre Version 10
25 June, 2010 | Andrew Wireless Solutions
Version 10 of GeoLENs mobile location centre, the flexible system platform of its GeoLENs wireless and wireline location solution has been released.
Agilent InfiniiVision 7000 series oscilloscopes
25 June, 2010 | Keysight Technologies Australia Pty Ltd
Agilent has added 14 models to its InfiniiVision 7000 series mixed-signal and digital-storage oscilloscope range. The scopes offer bandwidths from 100 MHz to 1 GHz.
RF Micro Devices 10.0 - 16.0 GHz GaAs pHEMT I/Q converters
25 June, 2010 | RF Parts Australia Pty Ltd
RF Micro Devices has released a portfolio of 10.0 - 16.0 GHz GaAs pHEMT I/Q converters, the first in a series of microwave radio front ends to be launched by RFMD for wireless backhaul applications.
Hirschmann WLAN access point BAT54-rail single
25 June, 2010 | Belden Australia Pty Ltd
Belden has extended its range of Hirschmann products to include the WLAN access point BAT54-rail single, designed for mounting on a top-hat rail so that it can be used both as access point and access client.
Yokogawa DLM6000 mixed-signal digital oscilloscopes
25 June, 2010 | Yokogawa Australia Pty Ltd
The DLM6000 mixed-signal digital oscilloscopes feature bandwidths of up to 1.5 GHz, memory of 6.25 Mpoints per channel, an intuitive graphical user interface and several analysis features.
Fluke 233 wireless remote display digital multimeter
25 June, 2010 | Fluke Australia Pty Ltd
The Fluke 233 wireless remote display digital multimeter features a removable magnetic display that allows users to be 10 m away from the measurement point - helpful for difficult measurements where display viewing is challenging - using low-power wireless technology that is not susceptible to interference.
Eldon Multi-Flex floor-standing enclosures
25 June, 2010 | NHP Electrical Engineering Products Pty Ltd
The Multi-Flex range of floor-standing enclosures from Eldon is claimed to be one of the most technically advanced products available due to its design and extensive mounting possibilities that save installation time.
PMM 9010/9030P EMI test receiver
25 June, 2010 | Consultant Technology Australia Pty Ltd
The PMM 9010/9030P EMI test receiver has two RF inputs, one covering compliant EMC RF emission testing between 9 kHz and 30 MHz (conducted emissions) and the other for precompliant (radiated) testing between 30 MHz and 3 GHZ.