Power amplifiers
05 June, 2007 | RF Parts Australia Pty Ltd
RF Micro Devices Inc has extended its product range with multiple cellular power amplifiers, transmit modules and front-end modules targeting all tiers of GSM/GPRS/EDGE and 3G multimode handsets.
Broadband circulator
05 June, 2007 | ASD Technology Pty Ltd
Renaissance Electronics has developed a broadband ferrite-based circulator and isolator series that covers the 225 to 400 MHz band.
Handheld RF spectrum analyser
05 June, 2007 | Keysight Technologies Australia Pty Ltd
Agilent has announced the worldwide availability of its first handheld RF spectrum analyser. Weighing 3.5 kg, including the battery, the Agilent N9340A is an excellent choice for a portable, high-performance and affordable spectrum analyser.
Tri-sector antenna
05 June, 2007 | Maser Technology Group
Kathrein has released a modular concept, similar to a three sector pipe antenna form factor with azimuth adjustment. It also incorporates a retrofit principle for existing A panels including dual and triple-band base station antennas.
SMA100A signal generator with SMA-K25 option
05 June, 2007 | Rohde & Schwarz (Australia) Pty Ltd
When equipped with the R&S SMA-K25 option, the analog R&S SMA100A high-end generator operates as a source for precise VOR/ILS signals. The instrument's low modulation errors and high-level accuracy permit reliable tests on air navigation receivers.With a frequency range of 9 kHz to 6 GHz, it can be used for all applications in the laboratory, in production, and in services that require signals of high spectral purity.
Wireless control
05 June, 2007 | RF Modules Australia
Radiometrix can now offer additional functionality in some models of its radio products. By programming in a special version of the internal firmware (ordered with a -CX suffix) the radio units can be used as a simple remote control link.
Broadband UHF Yagi antenna
05 June, 2007 | The Bridge Networks
The Bridge Networks has released the NHY409-4052 and the NHY415-4052 broadband Yagi antennas for use in the PMR UHF band 400-520 MHz.
Mixer for instrumentation
05 June, 2007 | Clarke & Severn Electronic Solutions
Test instrumentation may need to accommodate signals having a wide percentage frequency bandwidth. For easy processing of these RF signals, the input can be up-converted to reduce the percentage bandwidth.
Phone fault finder
05 June, 2007 | Scientific Devices Australia
The 3100 mobile phone fault finder supports GSM, EDGE and WCDMA testing and is CDMA2000 upgradeable.
470-520 MHz radios
05 June, 2007 | Daniels Electronics Ltd
Daniels Electronics has expanded its UHF analog and digital P25 radio product range to operate in the 470-520 MHz T-band.
GaAs MMIC receiver
04 May, 2007 | Richardson Electronics Pty Ltd
Mimix Broadband has introduced an SMT packaged gallium arsenide (GaAs) monolithic microwave integrated circuit receiver comprising a three-stage low noise amplifier followed by a single transistor 'Tee' attenuator and an image reject fundamental resistive mixer.
Narrowband radio receiver
04 May, 2007 | RF Modules Australia
The Radiometrix NRX1 is a VHF equivalent of the company's UHF NRX2 radio data receiver, but allows engineers to gain extra reach with their system designs.
Wideband amp modules
04 May, 2007 | ASD Technology Pty Ltd
Hittite has released two MMIC-based connectorised power amplifier modules for broadband instrumentation, test equipment and communications applications from 10 MHz to 15 GHz.
868 MHz FM transmitter
04 May, 2007 | RF Modules Australia
The TX3B is a radio transmitter module from Radiometrix which can support data rates of up to 64 Kbps.
SENCITY Link - wireless broadband mmW connection
04 May, 2007 | Huber+Suhner Aust Pty Ltd
SENCITY LINK operates at a frequency of 60 GHz with a net data rate of 100 Mbps full duplex over a distance of up to 800 m (2600 ft).
