RFI has released the CD2410, a slimline antenna supporting the 802.11 standard at 2.4 GHz. The antenna features 10 dBi gain and is supplied with a mounting bracket allowing installation to both a mast and wall.
WaveRider's Solectek SkyWay 5101 is a 5.8 GHz frequency band product with rapid data rates for long distance wireless networking. Immunity to common impairments and an extensive bundle of software features combine with data rates up to 72 Mbps to deliver more data capacity per sector than previously. Users can download large data files, high-resolution images, video clips and MP3 files within a matter of seconds. Even streaming multimedia can also be delivered seamlessly.
The airHaul Nexus intelligent wireless backhaul family of LongRange broadband wireless products from smartBridges is designed to provide an alternative to expensive, leased T1/E1 lines and multiple T1 circuits. The backhaul radios provide a solution for near-line-of-sight applications in enterprise point-to-(multi)point wireless wide area networks (WAN) or service provider extensions (full-repeater).
The three-foot (0.9 m) diameter CompactLine SB3 microwave antenna completes the RFS CompactLine suite in the one- to four-foot diameter area. Suitable for point-to-point applications, the antenna incorporates all the standard features of the single and dual polarised CompactLine range including a short shroud for low visual impact and a modified Cassegrain feed system with shaped subreflector for optimum gain and pattern performance. The feed system is protected by a solid radome.
The GPS18-A high performance GPS antenna is suited to automotive use and a variety of OEM system integrator and end-user applications. It features: a low noise figure of 1.0 dB - suitable for use in high foliage and urban valley areas; operation from 2.5 to 5.5 VDC; 31 dBi gain; 22 mA consumption; a magnetic base for easy mounting; and a 5 m RG174 and terminated SMB connector.
Innovative Energies' No-Break 3 battery backed-up DC power supply system employing 'smart' testing for battery presence does not rely solely on charge current sensing or power supply output interruption. The NB3 system continuously monitors charge current and initiates a full test if current falls below a set value for any reason; within a set time interval.