Niobium waveguide achieves high-precision comms for B5G/6G
31 October, 2023Researchers have made a breakthrough in the world of Beyond 5G/6G signal transmission, creating a waveguide made of niobium that speeds up the transition of B5G/6G signals.
Rethinking vegetation management along powerlines with satellite imagery
24 February, 2023Geospatial developer platform and marketplace UP42 helped AiDash transform vegetation management for a Fortune 500 power utility company.
Optus set to utilise 5G in energy sector
24 September, 2021Collaborating to deploy for Endeavour Energy's grid reliability and worker safety.
Netherlands launch first nationwide LoRa network for IoT
05 July, 2016The KPN LoRa network is now available throughout the Netherlands — the first country in the world to have a nationwide LoRa network for IoT applications.
Omnetics SureCon 360° watertight overmoulded circular connector
05 February, 2013Omnetics has introduced the SureCon 360° - a watertight, overmoulded circular connector to the Nano 360° series.
Link Microtek dual-channel rotary joint for airborne satcom systems
21 January, 2013The engineering division of Link Microtek has introduced a dual-channel rotary joint that is specifically aimed at applications in Ka-band satellite communications systems on board aircraft or unmanned aerial vehicles.
Mini Circuits Quick-Lock test cable
15 May, 2012The Quick-Lock test cable is suitable for frequencies from DC to 18 GHz with a 28 dB return loss at the highest frequency.
Pasternack Enterprises 7/16 DIN low PIM connector range
04 April, 2012Pasternack Enterprises has released the 7/16 DIN line of low PIM (passive intermodulation distortion) connectors, designed for applications where intermodulation distortion is a concern.
Spuma 400 FR flexible flame-retardant RF communication cable
25 June, 2010 byThe Spuma 400 FR flexible flame-retardant RF communication cable with VSWR gives good electrical performance with low loss characteristics. It is a good solution for wireless systems such as WLL, GPS, WLAN, WISP and WiMAX and it is a suitable cable for industrial applications.
SmartPlex models 782 10900 (BTS) / 782 10901 dual-band combiners
01 March, 2010 byThe SmartPlex models 782 10900 (BTS)/782 10901 (ANT) are a compact series of intelligent multiprotocol dual-band combiners covering the frequency ranges 380-960 MHz and 1710-2690 MHz while providing a low insertion loss and allowing high input power. They can be powered either via a CCU or a BTS.
Aluminium cable no longer a lightweight
01 January, 2010 by Ben Cardwell, vice-president, Asia-Pacific and China, AndrewTelecom operators often find themselves pulled into a polarised situation that includes cost-control and planning for new bandwidth-hungry applications. Across the industry, operators are re-aligning their network strategies to preserve their operating margins.
Indoor coverage
17 August, 2009 byRadio Frequency Systems (RFS) has available its ClearFill Space2 solutions, a multi-band multi-operator RF-over-fibre distribution system for wireless indoor coverage especially serving the public transport sector (metro, rail and road tunnels).
Transmission lines
17 August, 2009 byRFS (Radio Frequency Systems), has boosted its range of cables with the addition of several new Cellflex Lite corrugated aluminium coaxial transmission line products including the ½-in LCF12-50JL, the 1¼-in LCFS114-50JL and the ultra-flexible 1¼-in UCF114-50JL.
Network cabling
17 August, 2009 bySiemon’s Z-MAX end-to-end network cabling solution has been designed from the ground up to offer the best-in-class performance through an innovative matched system which combines an optimally tuned plug with a higher performance outlet. It has been designed to shatter the previous limitations of the RJ-45 interface with the 6A twisted pair copper family available in category 6A UTP and shielded configurations.
Transmission line guide
22 June, 2009 bySamtec’s transmission line solutions provide paths of least resistance for routing signals from one location to another when signal integrity, EMI, pin mapping, rugged environments or power requirements present design challenges.
