Portable appliance tester
01 April, 2009 | TRIO Test & Measurement
The SafeTcheck Pro Logger II is an electrical portable appliance tester (PAT), designed and manufactured in Australia. The tester ensures the electrical safety of appliances complies with the requirements of the current Australian and New Zealand Standard AS/NZS3760 (In-service safety inspection and testing of electrical equipment).
Wireless router
01 April, 2009 | D-Link Australia Pty Ltd
The DIR-855 is a simultaneous dual band draft 802.11n wireless router designed to enable Wi-Fi networks running multiple devices.
Wi-Fi optimiser
01 April, 2009 | Pacific Satellite Pty Ltd
Berkeley Varitronics has released Beetle-Bang, a wireless test receiver system that verifies, sweeps, measures and optimises all 802.11 Wi-Fi network standards including 802.11b/g (2.4 GHz), 802.11a (5 GHz) and 802.11n.
Low-loss splitter
01 April, 2009 | ASD Technology Pty Ltd
ASD has introduced a low-loss splitter, SPD-90-210, that spans the frequency band of 900-2100 MHz maintaining tight phase and amplitude tracking, typically within 3° and 0.2 dB of signal unbalances within the specified frequency band.
Drive-test system
01 April, 2009 | Andrew Australia
Andrew is going indoors with its Invex.NxG wireless drive-test system, offering equipment that makes designing and testing indoor wireless coverage systems easier.
Portable terminal
01 April, 2009 | Simoco Wireless Solutions Pty Ltd
The SRP9180 is the newest addition to the Simoco range of mobile radio terminal products. It is based on the existing SRP9100 series Xmode platform.
Tools and connectors
01 April, 2009 | Andrew Australia
The family of EZfit series tools and connectors from Andrew is designed for all 50 Ω coaxial cable applications.
TR3M narrowband transceiver
01 April, 2009 | RF Modules Australia
The TR3M from Radiometrix is a high-end multi-channel narrowband transceiver that operates in the European 868 MHz band (though custom variants for any 3 MHz frequency block from 860-870 MHz are available).
Clamp meter
01 April, 2009 | Extech Instruments
The EX 800 series clamp multimeter combines a 1000 A clamp meter with a non-contact infrared thermometer guided by a laser pointer.
EMC RF amplifiers
01 April, 2009 | Westek Electronics Pty Ltd
Teseq (formerly the instrumentation division of Schaffner) has released a range of RF broadband, power amplifiers covering frequencies to 6 GHz and with outputs to 1100 W.
Power quantity analyser
01 April, 2009 | AEMC Instruments
The PowerPad Jr model 8230 is a shock-resistant single-phase power quality analyser that measures and carries out diagnostic work and power quality work on single-phase systems or three-phase balanced low-voltage networks.
Multifunction tester
01 April, 2009 | Eaton Electrical (Australia) Pty Ltd
The Kyoritsu 6016 is a 10-in-1 multifunction tester, ergonomically styled with the top cover slotting in beneath the unit while the unit is in use.
Chip antenna
01 April, 2009 | Arrow Electronics Australia Pty Ltd
Yageo has released what it claims is the smallest 5320 coupling chip antenna featuring low sensitivity to environment interference as well as less stray capacitance.
Hioki 3490 insulation tester
01 April, 2009 | Power Parameters Pty Ltd
The Hioki 3490 analog insulation/continuity tester has been designed with the testing requirements of AS/NZS3017 and the domestic installation electrician in mind.
Multiport test set
01 April, 2009 | Keysight Technologies Australia Pty Ltd
Agilent has added the 2/4 port, 20 GHz option to its ENA network analysers, as well as introducing an E5092A configurable multiport test set.
