Research :: Critical Comms

Research

RF Industries Panduit MEHT187 portable embossing tool

09 December, 2011 | Supplied by: RFI Technology Solutions

Site-based cable labelling is easier with the Panduit MEHT187. The tool features a multifunctional cutting die design that creates embossed marker plates with raised cable tie slot in one step instead of three, for faster installation.

RF Industries One Tape Pro self-fusing silicon tape

08 December, 2011 | Supplied by: RFI Technology Solutions

One Tape Pro is a self-fusing, UV-resistant silicon tape which is a suitable alternative to traditional butyl rubber weatherproofing.

C4i radio interface unit

07 December, 2011 | Supplied by: EXELIS C4i Pty Ltd

The radio interface unit (RIU) is one of the SwitchplusIP core building blocks and provides a seamless interface between radios and telephony assets using open standards VoIP technology.

GainSpan GS1011 chip and module range

21 November, 2011 | Supplied by: Glyn Ltd

GainSpan has released GS1011 chip and module products and a suite of embedded and serial to Wi-Fi software.

Richardson RFPD 506WLC ultra-broadband inductor series

19 October, 2011 | Supplied by: Wireless Components

Richardson RFPD has been selected by American Technical Ceramics as the globally exclusive distributor for the 506WLC series of ultra-broadband inductors that have been engineered with a powdered iron ferrite core and gold-plated terminations to provide performance beyond 40 GHz.

Alpha EF-6850HF liquid soldering flux

14 October, 2011 | Supplied by: Active Components Australia Pty Ltd

Alpha has launched EF-6850HF liquid soldering flux, a halogen-free, low solids, alcohol-based, no-clean flux formulated for use in Sn-Pb and Pb-free applications on both standard and thicker, high-density PCBs.

Veroshield screening cases

12 October, 2011 | Supplied by: Lektronics Pty Ltd

Designed for applications that demand a high level of EMC screening, strength and usability, Veroshield cases are made from 0.9 mm galvanised steel to maintain electrical conductivity throughout.

CalAmp Viper SC radio modems

11 October, 2011 | Supplied by: Telephus Pty Ltd

CalAmp Viper SC radio modems deliver up to 48 Kbps IP over narrowband UHF and VHF channels allowing secure data from field assets to the company LAN.

Fujikura FSM60S splicer/CT30 cleaver

27 September, 2011 | Supplied by: TechRentals

The Fujikura FSM60S splicer and CT30 cleaver have been introduced to the TechRentals test and measurement rental fleet.

DECT-Com II wireless duplex intercom system

14 September, 2011 | Supplied by: Pacific Wireless Communications Pty Ltd

3M Peltor with PWC have announced the DECT-Com II wireless duplex intercom system. Operating at 1.8 GHz DECT, it allows up to nine users to communicate in full duplex within a work team.

Crystek CVCO55CC-2515-2530 VC oscillator

02 September, 2011 | Supplied by: Wireless Components

Crystek’s CVCO55CC-2515-2530 VCO (voltage controlled oscillator) operates from 2515 to 2530 MHz with a control voltage range of 0.3 to 4.7. This VCO features a typical phase noise of -116 dBc/Hz at 10 KHz offset and has good linearity. Output power is typically +4.5 dBm.

LPRS IQVCP visual control panel range

31 August, 2011 | Supplied by: Telelink Communications

LPRS, a European supplier of short-range radio devices, has released the IQVCP range of visual control panels. These OEM LCD display and touch-screen controllers are suitable for man-machine interfaces and may be fully integrated with the IQRF wireless communication system available from LPRS.